Magnetic Particle Testing Products
Magnetic Particle Testing is one of the Non Destructive Method of testing of ferromagnetic components for the detection of surface & subsurface cracks, heat treatment cracks, stringer type non metallic inclusions, porosities, laps & folds. The method can be applied to Finished Articles, Billets, Hot Rolled Bars, Casting & Forgings, Pipelines, Bars & Rods, Crank Shafts, Wheels, Pins, Fabrication & Maintenance, Shipping, Railways, Automotive, Power Generating Industries etc.
We offer a complete Range of Magnetic Particle Testing Consumables for Non Destructive Testing. All these products are highly reliable and meet the requirement of most of the International Specifications such as ASME Sec V, Article 7, ASTM E-709/1444, IS-6410, BS4069/6072 & RDSO etc. specification for Magnetic Particle Inspection
Selection Chart
| Non Fluorescent Magnetic Powders |
| Item |
| Automag BD-1
|
| Automag RD-7
|
| Automag GD-8
|
| Automag BO-23
|
| Automag RO-26
|
| Automag BW-245
|
| Automag RW-246
|
| Fluorescent Magnetic Powders |
| Automag Fluo-22
|
| Green Dust 88K
|
| Green Dust 88WG
|
| Aerosol Products : Packing : 550 ml Aerosol Can : 425 ml net content |
| White Contrast
|
| Magna Ink BK
|
| Magna Ink GYK
|
| Other Products |
| Carrier Liquid GP
|
| Carrier Liquid SP
|
Water Conditioner
WA-29
|
| Non Fluorescent Magnetic Powders |
| Item |
Method |
Colour |
Application |
Particle Size |
Carrier
Liquid |
Sensitivity
Ketoes Ring |
|
| Automag BD-1 |
Dry |
Black |
Day Light |
100μ |
- |
6-7 |
|
| Automag RD-7 |
Dry |
Red |
Day Light |
100μ |
- |
6-7 |
|
| Automag GD-8 |
Dry |
Gray |
Day Light |
100μ |
- |
6-7 |
|
| Automag BO-23 |
Wet |
Black |
Day Light |
5-20μ |
Petroleum Oil |
6 |
|
| Automag RO-26 |
Wet |
Red |
Day Light |
5-20μ |
Petroleum Oil |
6 |
|
| Automag BW-245 |
Wet |
Black |
Day Light |
5-20μ |
Water |
6 |
|
| Automag RW-246 |
Wet |
Red |
Day Light |
5-20μ |
Water |
6 |
|
| Fluorescent Magnetic Powders |
| Automag Fluo-22 |
Dry |
Bright Green |
UV Light |
120 m |
- |
6-7 |
|
| Green Dust 88K |
Wet |
Bright Green |
UV Light |
5 to 8 m |
Petroleum
Oil |
8-9 |
|
| Green Dust 88WG |
Wet |
Bright Green |
UV Light |
5 to 8 m |
Water |
8-9 |
|
| Aerosol Products : Packing : 550 ml Aerosol Can : 425 ml net content |
| White Contrast |
Quick Drying Non-Fluorescent White coat. Coating thickness 10 microns in single application. Easy to remove after use - Uniform Coating for better contrast - Supplied in Aerosol Cans. |
|
| Magna Ink BK |
Ready To Use Black Magnetic Ink in Aerosol Spray. Particle size less than 5 micron. sensitivity minimum 7 on Ketoes Ring. |
|
| Magna Ink GYK |
Ready To Use Bright Golden Yellow Fluorescent Magnetic Ink in Aerosol Spray. Particle Size less than 5 micron. Sensitivity minimum 7 on Ketoes Ring. |
|
| Other Products |
| Carrier Liquid GP |
Petroleum oil base carrier liquid with Min. flash point 52 Deg. C. suitable for wet Magnetic Particle Testing. Odorless, operator friendly. |
|
| Carrier Liquid SP |
Petroleum oil base carrier liquid with 92 Deg. C flash point suitable for wet Magnetic Particle Testing. Odorless Operator friendly. |
|
Water Conditioner
WA-29 |
Supplied as powder and contains wetting, anti-foaming, anti corrosive and water softeners pre blended.
Recommended 10 gms per litre of water when used with Green Dust 88K to make it suitable for suspension in water. |
|
