logo
You are here > Home > Products > Dye Penetrant Testing Products

Dye Penetrant Testing Products

Dye Penetrant Testing is One of the non destructive method of testing used for detection of defects which are open to the surface. Method is quite simple and used in many industries such as Heavy Engineering, Automotive, Shipping, Nuclear Power, Thermal Power, Wind Power, Petroleum, Aerospace, Boiler and Heat Exchanger Manufacturers, Railways etc.

We offer a complete range of Dye Penetrant Testing Consumables for Non Destructive Testing. All these products are highly reliable and meet the requirements of most of the international specifications such as ASME Sec V, ASTM, IS, BS, DIN, JIS, MIL, NAVSEA, EN , BIS, NPCIL, RDSO Specifications for Liquid Penetrant Inspection.

SELECTION CHART

Flaw Guide Penetrants Packings : 1/5/20 Ltr. Container : 350ml. / 550 ml. Aerosol Can
Item Colour Type Sensitivity
Red Dye Penetrant GP Red in Day Light Solvent Clean 1 x 20 μ
Red Dye Penetrant NP Red in Day Light Solvent Clean 2 x 50 μ
Red Dye Penetrant W Red in Day Light Water Washable 1 x 20 μ
Red Dye Penetrant SP Red in Day Light Solvent Clean
/ water washable
1 x 30 μ
Dye Penetrant Fluo GP Bright Yellow Green
Under UV Light
Solvent Clean 0.5 x 10 μ
Dye Penetrant Fluo W Bright Yellow Green
Under UV Light
Water Washable 0.5 x 10 μ
Dye Penetrant DM
(Dual Mode Dual Purpose)
Red Under day light &
Bright Orange
Under UV Light
Water Washable
as well as
Solvent Clean Type
1 x 20 μ in
Day Light &
0.5 x 10 u in
UV Light
Flaw Guide Dual Mode Penetrant
Flaw Guide Fluorescent Penetrants
Flaw Guide Red Penetrants
Flaw Guide Post Emulsifiable Penetrants
Flaw Guide Post Emulsifiable Penetrant System
Flaw Guide Developers Packings : 1/5/20 ltr container - 350 ml / 550 ml . Aerosol Can
Developer GP Non Aqueous Developer based on Non Halogenated, Flammable Solvent for all application.
Developer NP Non Aqueous Developer based on Non Halogenated Flammable Solvent Specially For Nuclear applications. Approved by NPCIL.
Developer SP Non Aqueous Developer based on Non Halogenated Flammable Solvent for Special Application.
Developer P Dry Developer Powder For Dry application By Spraying or Dipping
Flaw Guide Cleaners Packings : 1/5/20 ltr container - 350 ml / 550 ml . Aerosol Can
Cleaner-GP Non Aqueous Penetrant Remover / Cleaner based on Non Halogenated, Flammable Solvents.  
Cleaner-NP Non Aqueous Penetrant Remover based on Non Halogenated, Flammable solvents for Nuclear applications. Approved by NPCIL.  
Cleaner-SP Non Aqueous Penetrant Remover based on Non Halogenated, Flammable solvents For Special applications.  
Cleaner HD-125 This Is Neutral Liquid for removal of oil & Grease- To be diluted with water  
   
 
Simple to use NDT technique - widely used across many industries